YCAM InterLab

Set up the amplifier shield to the tree

1. Connect the Arduino UNO to microSD Shield
2. Connect the amplifier shield
3. Set up the Arduino and the Computer
4. Set up the electrode cable on the tree.
5. Connect the electrode cable to the amplifier shield.

if you install to the outside

1. if you set up the waterproof box to the selected tree
2. Fix the measuring kit on the waterproof box.

+α

• about environmental sensor.
• If you are using a ground bar.

This Document by YCAM InterLab is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.